高密度发光材料BiTaO4∶Pr3+和BiTaO4的发光特性研究

研究了BiTaO4∶Pr3+, BiTaO4的光致发光性质, 测量了BiTaO4的红外透射和漫反射光谱. BiTaO4的光致发光光谱发射峰位于约420, 440, 465 nm; 其激发谱在约330～370 nm范围有明显的激发. BiTaO4∶Pr3+的光致发光光谱为Pr3+的特征发射, 主峰为606 nm, 来自Pr3+的3P0→3H6跃迁; 其激发谱由来自于基质的峰值为325 nm和范围在375～430 nm的宽激发带以及Pr3+的特征激发组成, 325 nm, 375～430 nm的激发带可能分别来自钽酸根团的电荷迁移跃迁和基质的带间缺陷能级的吸收; 在BiTaO4∶Pr3+中存在着基质→Pr3+的能量传递. 由于BiTaO4∶Pr3+基质的密度和Pr3+的发光强度均超过PbWO4, 因此BiTaO4∶Pr3+可能是潜在的重闪烁体.     

Resistance to Surfactant and Protein Fouling Effects at Conducting Diamond Electrodes

Boron‐doped diamond thin‐film electrodes display negligible fouling effects in the presence of high levels of surface‐active materials, including proteins. Dramatic improvements in the stability of the analyte response (compared to common glassy carbon and carbon paste electrodes) are illustrated using bovine serum albumin (BSA), gelatin, and Triton X‐100 in connection with repetitive square‐wave voltammetric (SWV) measurements. The voltammetric response of ascorbic acid at the diamond electrode exhibits negligible shifts in peak potentials and minimal depressions of current signals over a wide range of surfactant concentrations (0–750 ppm). For example, the diamond electrode exhibited 70, 50 and 60 mV potential shifts for 10 repetitive voltammetric scans in the presence of 100 ppm BSA, gelatin and Triton X‐100, respectively, compared to 120, 190, and 280 mV shifts observed at the glassy carbon electrode. Furthermore, only 4.3 and 6.2% of the initial current decays were observed in the presence of 100 ppm Triton X‐100 and gelatin, respectively (compared to 45.2 and 34.4% diminutions at the glassy carbon electrode). Such improved performance was also confirmed from the SWV measurements of uric acid, dihydroxyphenylacetic acid, and catechol. The greatly improved resistance to surfactant interference reflects the fact that the as‐grown diamond thin film, composed of oxide‐free and hydrogen‐terminated surface, has a relatively lower surface energy and minimal electrostatic attributes, either specific or general, so that little adsorption of surface‐active agents occurs. The topographic AFM images of the diamond electrode surface confirm a negligible BSA fouling effect after repetitive SWV measurements. Such enhanced antifouling features make diamond electrodes very attractive for numerous real‐life electroanalytical applications.     

研磨法合成1,2,3,6-四氢嘧啶-2-酮衍生物

以NH₂SO₃H为催化剂, 室温无溶剂条件下, 研磨芳醛、β-酮酸酯和尿素合成了一系列1,2,3,6-四氢嘧啶-2-酮衍生物. 该方法具有反应条件温和、操作简便、环境友好、产率高等优点.     

液相色谱电化学安培检测乳粉中的脂溶性维生素A, E和D3

利用维生素A、D3、E均有电化学活性的特点,采用电化学安培检测,建立了HPLC检测奶粉中的脂溶性维生素A、D3、E的新方法.流动相为甲醇∶水=95∶5(V/V),含0.05 mol/L高氯酸钠.检测器采用玻碳电极,直流安培模式(DC),氧化电位 1.3 V.方法检测限为:VA、VD3、-αVE、-γVE、-δVE分别为0.08、2.3、0.16、0.19、0.28ng.回收率分别为:90.2%~98.2%、91.2%~103%、92.7%~99.5%、92.6%~97.4%、90.7%~98.0%.同紫外检测比较,方法具有灵敏度高、抗干扰强的特点.     

微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。     

MZr2（AsO4）3（M=Na,K,Rb,Cs）的水热合成与结构表征

用水热晶化法合成了MZr_2(ASO_4)_3(M=Na,K,Rb,Cs)系列化合物。研究了反应物浓度、配比及不同砷源等水热晶化条件对产物物相的影响。用XRD、IR和Raman光谱对产物进行了表征。4种晶体的振动光谱由钠到铯呈现出规律性变化。     

Synthese und Geruch von Tricyclo[6.2.2.02, 7]dodecan-Derivaten

Summary The acetale-ketone9 was synthesized as precursor for the preparation of -santalol derivatives posessing a bicyclo[2.2.2]octane nucleus. After methylenation of the keto-group the subsequent acidic hydrolysis of the acetal leads via a Prins reaction of the liberated aldehyde with the methylene group to tricyclo[6.2.2.0^{2, 7}]dodecane derivatives. Their olfactory properties are described.

     

Spectrophotometric determination of Fe(II) in milligram solid samples

The analytical procedure of determination of Fe(II) in the presence of Fe(III) in milligram samples is proposed. A solid sample is dissolved in hydrochloric acid in argon atmosphere. Subsequently, the pH-value of the solution is fixed and Fe(III) complexed by phosphoric buffer. At the next step Fe(II) is oxidized by -molybdosilicic acid. Finally, the intensity of colouring caused by the reduced form of the acid is measured at the wavelength 770 nm. The proper treatment of the sample during oxidation, and immediately before, is decisive for the accuracy of the analysis. The method was verified by means of the analysis of synthetic magnetite. The theoretical content of Fe(II) was 24.12%, the determined one was 24.02 ± 0.10%. The method was applied to the determination of the homogeneity of an iron catalyst for ammonia synthesis.     

1－N－（苯并咪唑－1－乙酰基）－4－苯基－3－氨基硫脲金属配合物的合成及结构表征

合成了新配体１－Ｎ－（苯并咪唑－１－乙酰基）－４－苯基－３－氨基硫脲（ＢＰＭＳ），将其与Ｍｎ（Ⅱ）、Ｃｏ（Ⅱ）、Ｎｉ（Ⅱ）、Ｃｕ（Ⅱ）、Ｃｄ（Ⅱ）、Ｚｎ（Ⅱ）、ＵＯ２（Ⅱ）等金属的醋酸盐反应，合成了７个新配合物。所有化合物均经元素分析、ＩＲ、１ＨＮＭＲ和热重分析等表征。红外光谱表明，配体以四齿方式通过烯醇式羰基氧原子、烯醇式硫羰基硫原子以及Ｃ＝Ｎ１和Ｃ＝Ｎ２的氮原子与金属配位     

A Novel Photoproduct of 1, 3-Dimethyluracil in Phosphate Buffered-saline

1, 3-Dimethyluracil （DMU） in phosphate buffered-saline （PBS, pH=8） was irradiated by a medium pressure mercury lamp （MPML） and produced a novel compound C6H9N2O6P. The composition and structure of the compound has been identified by elemental analysis, EIMS, UV, IR, ^1H and ^31P-NMR.